Last Modified: 11-29-2007 1.6 A
Service Category: Vehicle Exterior Section: Exterior Panels/Trim
Model Year: 2008 Model: Sequoia Doc ID: RM000003GRZ000X
Title: EXTERIOR PANELS / TRIM: ROCKER PANEL MOULDING: REMOVAL (2008 Sequoia)

REMOVAL

HINT:

  • Use the same procedure for both the RH and LH sides.
  • The procedure described below is for the LH side.

1. REMOVE SIDE STEP ASSEMBLY EXTERIOR PANELS / TRIM: SIDE STEP: REMOVAL (2008 Sequoia)+

2. REMOVE BODY ROCKER PANEL MOULDING ASSEMBLY

(a) Remove the 4 screws.

(b) Disengage the claw and remove the body rocker panel moulding.

3. REMOVE ROCKER PANEL FRONT MOULDING ASSEMBLY



(a) Remove the screw.

(b) Disengage the clip and remove the rocker panel front moulding.